MIRK #425P

425P PRESSURE DIGGER

DESCRIPTION

2000 Kenworth T-800 Wide Track
V/I # 1NKDLB0X9YJ862932
C-15 CAT 500 HP 6 Cylinder Diesel Engine
Fuller 16909 ALL-11 Speed Manual Transmission
22,000 lb. Front Axle 22,000 lb. Suspension
40,000 lb. 8'6' Wide Tandem Rears 4.63 Ratio
Chalmers 40,000 lb. Rear Suspension
Rear Tandem Power Divider and Posi-Traction
Double 'œC' Channel Frame
Air Brake, Air Conditioning, Air Ride Seat & Cab
425 x 65R22.5 Front Tires Alum. Bud
11Rx22.5 Pilot Bud Drives & Push Axle
100 Gallon Fuel Tank
Hi Steer 8'6' Pusher Axle Mod. 6000Texoma 700-60, S/N 1P74B83
2 Bar Telescoping - 5 1/2' Outer 4' Inner
4' Kelly Stub 2' x 6' Pin Holes
Hoist Force - 25,000 lbs.
Crowd Force - 25,000 lbs.
Drill Torque - 56,000 lbs. Ft. lbs.
25,000 lb. Pullmaster Inner Kelly Winch
12,000 lb. Service Winch
John Deere 6068T 155 HP Diesel
Allison Powershift 3531 Trans.
Drive Line Shear Pin Kit
4 Out & Down Outriggers
200 Gallon Water Tank
Dual Planetary Rotation Motors w/Bearing8'6' Wide Steel Flatbed Body
36' Wide Thru Box - Lockable
62,00 lbs. Gross Weight
19,460 lbs. Front Axle Weight w/Pusher Up
15,650 lbs. Front Axle Weight w/Pusher Down
43,000 lbs. on Drive Axles w/Pusher Up
33,580 lbs. on Drive Axles w/Pusher Down
13,230 lbs. on Pusher Axle @ 75 lbs.
200' Cab to Center of Tandem
192' From Steer Axle #1 to Air Pusher #2
54' From #2 Air Pusher to #3 Drive Axle
54' From #3 Drive Axle to #4 Drive Axle
5' Front Overhang
3' Rear Overhang
13'3' Overall Height