438S PRESSURE DIGGER

MIRK # 438S

CAB & CHASSIS
2003 PETERBILT 357
S/N: 1NPALBDX33D590463
C-15 CAT DIESEL 475 HP 6 CYLINDER W/ JACOBS BRAKE
FULLER RTLO 16918B 18 SPEED MANUAL/TRANSMISSION
SEVERE SERVICE ALUMINUM CAB/ DELUXE INTERIOR/
DELUXE SEATS/ CD PLAYER AM/FM
AIR CONDITIONED/ AIR HORNS/ DELUXE GAUGE PACKAGE/ HEATED CHROME MIRRORS
DOUBLE 'C' CHANNEL FRAME
22,000 lb. STANDARD TRACK PT. AXLE 23,000 lb.SUSP.
46,000 lb. WIDE TRACK TANDUM REARS 4.33 RATIO
CHALMERS 854-46,000 lb. SUSPENSION
10 HOLE PILOT BUDD ALCOA ALUMINUM RIMS
425/65 R 22.5 FRONT TIRES
11Rx22.5 REAR DRIVE TIRES + PUSHER AXLE
STI/ STEERABLE PUSHERS AXLE MOD HLT-10-002 (REVERSE MOUNT)
REAR SET UP FOR STINGER AXLE
MIRK MODEL 6090 DRILL RIG
S/N: 6090'”141
QUICK CHANGE KELLY BARS FROM 60' TO 90' DIG DEPTH
90' DIG DEPTH 8' OUTER BAR 6' INNER BAR 5/8 WALL
4' KELLY STUB 2 PIN LOCATIONS 2' + 6' 90°
APART 1 1/8' HOLES
40,000 LBS. ACHIEVABLE CROWD FORCE 25,000 LBS. LINE PULL ON INNER KELLY 86,000 LBS DRILL TORQUE
PULLMASTER H-25 GROOVED DRUM INNER KELLY HOIST M-12-12,000 lb SERVICE WINCH
JOHN DEERE 6068T 185hp 6cyl. TURBO DIESEL ENGINE
ALLISON CRT 3531 TORQUE CONVERTER 3 SPEED
FORWARD + REVERSE POWERSHIFT TRANS.
GEARED BEARING DUAL HYDRAULIC DRIVE
270° ROTATION
60' SLIDE FRAME FOR + AFT.
OUT + DOWN FRONT OUTRIGGERS
VARIABLE HEIGHT - LOW PROFILE - ANGLED HYDRAULIC + DOWN REAR OUTRIGGERS


DIMENSIONS
WIDTH OVERALL - 8'6'
OVERALL LENGTH - 44'11'
TRAVEL HEIGHT - 13'6'
FRONT OVERHANG - 119' (WITHOUT BUMPER EXTENTION)
OVERALL HEIGHT MAST UP - 52'6'
OVERALL WIDTH OUTRIGGERS OUT 14'6'
60' CLEARANCE TOP OF OUTRIGGER TO BOTTOM OF
ROTARY POT.
STEER AXLE #1 TO PUSHER AXLE #2 IS (117.5')
PUSHER AXLE #2 TO DRIVE AXLE #3 IS (145.5')
DRIVE AXLE #3 TO DRIVE AXLE #4 IS (54')
DRIVE AXLE #4 TO STINGER AXLE #5 IS (218')
GROSS WEIGHT:WITHOUT STINGER 68,000 lbs.
W/STINGER 72,500 lbs.
FRONT AXLE 20,720 W/PUSHER AXLE UP. DRIVES 47,220 PUSHER UP NO STINGER
*WITH STINGER AXLE COMPLETE UNIT LEGAL TO
TRANSPORT W/O PERMITS + UNDER ALL FEDERAL BRIDGE LAW REQUIREMENTS